When a tree is cut down, what remains is usually referred to as a stump. Cutting down a tree is much easier than removing a stump. It is for this reason stumps are not usually removed after a tree has been cut down. On the other hand, stumps need to be removed since they can be a hazard. When the right tools and the correct procedure is followed stumps can be easily removed. For the best Stump Grinding Western WI needs to be visited.
Removing stumps is important because they take up a lot of valuable space. The space could be put into more productive use. They also reduce the aesthetic value of a place. For instance, in a compound where several trees have been cut down, the sight left behind is usually unpleasant.
Before one decides to remove a stab there are a number of factors to be considered. It is usually easier to remove older tree stumps when compared to removing fresh stumps. It is also hard to remove stumps from deciduous trees since their roots go deeper into the ground. The size of the stab usually determines the method that will be used to remove it.
Mechanical tools like shovels, rakes, grinders and chainsaws can be used when removing stumps. The wood is ground to a small size or completely removed by use of grinders. Dirt around stumps are cleared off by use of rakes and shovels. A chainsaw is used to cut areas that grinders cannot access. The eyes should be kept protected because grinders throw off wood chips which can cause injury.
Stumps can also be removed using other tools besides grinders. This method is most suitable for small stumps. The upper part of the stump is cut using a chainsaw. The soil around the stab is then dug using a shovel to reach the roots. The roots are then cut using an axe until the stab becomes unsupported. The weakened stab can then be pulled out by tying a chain around it. The pulling can be done using a truck.
Chemicals can also be used to remove stumps. After the upper part has been cut with a chainsaw, holes are drilled into the sides and the top of the stump using a drill. Potassium nitrate is then poured into the holes. This makes the stab spongy within a period of around six weeks before an axe is used to remove the stump.
One can also use fuel or kerosene to remove the stump. When using this method, holes should be drilled into the stab then filled with fuel. It is then set on fire and left to burn for a week. This will make the wood burn completely leaving white ash behind.
The advantage of using a grinder or burning is that it is easy to dispose the wood chips and ash that forms from the process. If the stump is removed intact, it can be difficult to dispose it. Service companies usually carry away the stab after removing it. This is one of the advantages of hiring a professional service company.
Removing stumps is important because they take up a lot of valuable space. The space could be put into more productive use. They also reduce the aesthetic value of a place. For instance, in a compound where several trees have been cut down, the sight left behind is usually unpleasant.
Before one decides to remove a stab there are a number of factors to be considered. It is usually easier to remove older tree stumps when compared to removing fresh stumps. It is also hard to remove stumps from deciduous trees since their roots go deeper into the ground. The size of the stab usually determines the method that will be used to remove it.
Mechanical tools like shovels, rakes, grinders and chainsaws can be used when removing stumps. The wood is ground to a small size or completely removed by use of grinders. Dirt around stumps are cleared off by use of rakes and shovels. A chainsaw is used to cut areas that grinders cannot access. The eyes should be kept protected because grinders throw off wood chips which can cause injury.
Stumps can also be removed using other tools besides grinders. This method is most suitable for small stumps. The upper part of the stump is cut using a chainsaw. The soil around the stab is then dug using a shovel to reach the roots. The roots are then cut using an axe until the stab becomes unsupported. The weakened stab can then be pulled out by tying a chain around it. The pulling can be done using a truck.
Chemicals can also be used to remove stumps. After the upper part has been cut with a chainsaw, holes are drilled into the sides and the top of the stump using a drill. Potassium nitrate is then poured into the holes. This makes the stab spongy within a period of around six weeks before an axe is used to remove the stump.
One can also use fuel or kerosene to remove the stump. When using this method, holes should be drilled into the stab then filled with fuel. It is then set on fire and left to burn for a week. This will make the wood burn completely leaving white ash behind.
The advantage of using a grinder or burning is that it is easy to dispose the wood chips and ash that forms from the process. If the stump is removed intact, it can be difficult to dispose it. Service companies usually carry away the stab after removing it. This is one of the advantages of hiring a professional service company.
About the Author:
You can find an overview of the benefits you get when you use professional stump grinding Western WI services at http://www.nrtree.com right now.
